求救！sendmail认证~~~急
redhat 9上面，
cyrus-sasl-devel-2.1.10-4
cyrus-sasl-2.1.10-4
cyrus-sasl-plain-2.1.10-4
cyrus-sasl-md5-2.1.10-4
openssl-0.9.8e
sendmail-8-12.4
sendmail.mc配置如下：
/////////////////////////////////////////////////////////////////////
divert(-1)dnl
dnl #
dnl # This is the sendmail macro config file for m4. If you make changes to
dnl # /etc/mail/sendmail.mc, you will need to regenerate the
dnl # /etc/mail/sendmail.cf file by confirming that the sendmail-cf package is
dnl # installed and then performing a
dnl #
dnl # make -C /etc/mail
dnl #
include(`/usr/share/sendmail-cf/m4/cf.m4 ')dnl
VERSIONID(`setup for Red Hat Linux ')dnl
OSTYPE(`linux ')dnl
dnl #
dnl # Uncomment and edit the following line if your outgoing mail needs to
dnl # be sent out through an external mail server:
dnl #
dnl define(`SMART_HOST ',`smtp.your.provider ')
dnl #
define(`confDEF_USER_ID ',``8:12 ' ')dnl
define(`confTRUSTED_USER ', `smmsp ')dnl
dnl define(`confAUTO_REBUILD ')dnl
define(`confTO_CONNECT ', `1m ')dnl
define(`confTRY_NULL_MX_LIST ',true)dnl
define(`confDONT_PROBE_INTERFACES ',true)dnl
define(`PROCMAIL_MAILER_PATH ',`/usr/bin/procmail ')dnl
define(`ALIAS_FILE ', `/etc/aliases ')dnl
dnl define(`STATUS_FILE ', `/etc/mail/statistics ')dnl
define(`UUCP_MAILER_MAX ', `2000000 ')dnl
define(`confUSERDB_SPEC ', `/etc/mail/userdb.db ')dnl
define(`confPRIVACY_FLAGS ', `authwarnings,novrfy,noexpn,restrictqrun ')dnl
define(`confAUTH_OPTIONS ', `A ')dnl
dnl #
dnl # The following allows relaying if the user authenticates, and disallows
dnl # plaintext authentication (PLAIN/LOGIN) on non-TLS links
dnl #
define(`confAUTH_OPTIONS ', `A p y ')dnl
dnl #
dnl # PLAIN is the preferred plaintext authentication method and used by
dnl # Mozilla Mail and Evolution, though Outlook Express and other MUAs do
dnl # use LOGIN. Other mechanisms should be used if the connection is not
dnl # guaranteed secure.
dnl #
define(QUEUE_DIR, `/var/spool/mqueue/q* ')dnl
TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN ')dnl
define(`confAUTH_MECHANISMS ', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN ')dnl
dnl #
dnl # Rudimentary information on creating certificates for sendmail TLS:
dnl # make -C /usr/share/ssl/certs usage
dnl #
dnl define(`confCACERT_PATH ',`/usr/share/ssl/certs ')
dnl define(`confCACERT ',`/usr/share/ssl/certs/ca-bundle.crt ')
dnl define(`confSERVER_CERT ',`/usr/share/ssl/certs/sendmail.pem ')
dnl define(`confSERVER_KEY ',`/usr/share/ssl/certs/sendmail.pem ')
dnl #
dnl # This allows sendmail to use a keyfile that is shared with OpenLDAP 's
dnl # slapd, which requires the file to be readble by group ldap
dnl #
dnl define(`confDONT_BLAME_SENDMAIL ',`groupreadablekeyfile ')dnl
dnl #
dnl define(`confTO_QUEUEWARN ', `4h ')dnl
dnl define(`confTO_QUEUERETURN ', `5d ')dnl
dnl define(`confQUEUE_LA ', `12 ')dnl
dnl define(`confREFUSE_LA ', `18 ')dnl
define(`confTO_IDENT ', `0 ')dnl
dnl FEATURE(delay_checks)dnl
FEATURE(`no_default_msa ',`dnl ')dnl
FEATURE(`smrsh ',`/usr/sbin/smrsh ')dnl
FEATURE(`mailertable ',`hash -o /etc/mail/mailertable.db ')dnl
FEATURE(`virtusertable ',`hash -o /etc/mail/virtusertable.db ')dnl
FEATURE(redirect)dnl
FEATURE(always_add_domain)dnl
FEATURE(use_cw_file)dnl
FEATURE(use_ct_file)dnl
dnl #
dnl # The -t option will retry delivery if e.g. the user runs over his quota.
dnl #
FEATURE(local_procmail,` ',`procmail -t -Y -a $h -d $u ')dnl
FEATURE(`access_db ',`hash -T <TMPF> -o /etc/mail/access.db ')dnl
FEATURE(`blacklist_recipients ')dnl
EXPOSED_USER(`root ')dnl
dnl #
dnl # The following causes sendmail to only listen on the IPv4 loopback address
dnl # 127.0.0.1 and not on any other network devices. Remove the loopback
dnl # address restriction to accept email from the internet or intranet.
dnl #
dnl DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA ')dnl
dnl #
dnl # The following causes sendmail to additionally listen to port 587 for
dnl # mail from MUAs that authenticate. Roaming users who can 't reach their
dnl # preferred sendmail daemon due to port 25 being blocked or redirected find
dnl # this useful.
dnl #
DAEMON_OPTIONS(`Port=25, Name=MSA ')dnl
dnl #
dnl # The following causes sendmail to additionally listen to port 465, but
dnl # starting immediately in TLS mode upon connecting. Port 25 or 587 followed
dnl # by STARTTLS is preferred, but roaming clients using Outlook Express can 't
dnl # do STARTTLS on ports other than 25. Mozilla Mail can ONLY use STARTTLS
dnl # and doesn 't support the deprecated smtps; Evolution <1.1.1 uses smtps
dnl # when SSL is enabled-- STARTTLS support is available in version 1.1.1.
dnl #
dnl # For this to work your OpenSSL certificates must be configured.
dnl #
dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMTA, M=s ')dnl
dnl #
dnl # The following causes sendmail to additionally listen on the IPv6 loopback
dnl # device. Remove the loopback address restriction listen to the network.
dnl #
dnl # NOTE: binding both IPv4 and IPv6 daemon to the same port requires
dnl # a kernel patch
dnl #
dnl DAEMON_OPTIONS(`port=smtp,Addr=::1, Name=MTA-v6, Family=inet6 ')dnl
dnl #
dnl # We strongly recommend not accepting unresolvable domains if you want to
dnl # protect yourself from spam. However, the laptop and users on computers
dnl # that do not have 24x7 DNS do need this.
dnl #
FEATURE(`accept_unresolvable_domains ')dnl
dnl #
dnl FEATURE(`relay_based_on_MX ')dnl
dnl #
dnl # Also accept email sent to "localhost.localdomain " as local email.
dnl #
LOCAL_DOMAIN(`localhost.localdomain ')dnl
dnl #
dnl # The following example makes mail from this host and any additional
dnl # specified domains appear to be sent from mydomain.com
dnl #
dnl MASQUERADE_AS(`mydomain.com ')dnl
dnl #
dnl # masquerade not just the headers, but the envelope as well
dnl #
dnl FEATURE(masquerade_envelope)dnl
dnl #
dnl # masquerade not just @mydomainalias.com, but @*.mydomainalias.com as well
dnl #
dnl FEATURE(masquerade_entire_domain)dnl
dnl #
dnl MASQUERADE_DOMAIN(localhost)dnl
dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl
dnl MASQUERADE_DOMAIN(mydomainalias.com)dnl
dnl MASQUERADE_DOMAIN(mydomain.lan)dnl
MAILER(smtp)dnl
MAILER(procmail)dnl
/////////////////////////////////////////////////////////////////////
/sbin/service sendmail restart没有报错
只是/usr/sbin/sendmail -d0.1 -bv root出现：
Version 8.14.1
Compiled with: DNSMAP LOG MATCHGECOS MILTER MIME7TO8 MIME8TO7
NAMED_BIND NETINET NETUNIX NEWDB PIPELINING SCANF USERDB XDEBUG
Warning: Option: AuthMechanisms requires SASL support (-DSASL)
Warning: Option: AuthOptions requires SASL support (-DSASL)
============ SYSTEM IDENTITY (after readcf) ============
(short domain name) $w = localhost
(canonical domain name) $j = localhost.localdomain
(subdomain name) $m = localdomain
(node name) $k = localhost.localdomain
========================================================
而且我用telnet localhost 25
ehlo localhost
250-localhost.localdomain Hello localhost.localdomain [127.0.0.1], pleased to meet you
250-ENHANCEDSTATUSCODES
250-PIPELINING
250-8BITMIME
250-SIZE
250-DSN
250-ETRN
250-DELIVERBY
250 HELP
没有认证那句，求教各位，我倒底哪里出了问题？
/usr/lib/sasl,/usr/lib/sasl2,/usr/local/lib/sasl2下面的
Sendmail.conf 文件内容我都改成了
pwcheck_method: saslauthd
mech_list: login plain digest-md5
/etc/access下面我只剩下:
localhost RELAY
127.0.0.1 RELAY
现在不能发邮件,准确的说是不能对外网发邮件
不好意思，因为很着急，又在这栏发一次了，想要更多的人看到
[解决办法]
没用过sendmail，查一下你sendmail的配置里是否指定使用了sasl认证。