fedora14配置无线连接

首先安装无线网卡驱动

查看无线网卡设备型号：

输入命令：$ lspci -v

找到终端以下信息：

?

03:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)

Subsystem: Foxconn International, Inc. Device e021

Flags: bus master, fast devsel, latency 0, IRQ 17

Memory at 9a400000 (64-bit, non-prefetchable) [size=16K]

Capabilities: <access denied>

Broadcom Corporation BCM43225就是无线网卡的型号。在Broadcom官网（http://www.broadcom.com/support/802.11/linux_sta.php）下载驱动并编译安装（根据自己的系统去选择32位还是64位）

?

安装步骤：(1) 卸载冲突模块输入命令：$ sudo rmmod b43$ sudo rmmod ssb$ sudo rmmod wl
(2)屏蔽冲突模块输入命令：$ echo ?"blacklist ssb"?>> /etc/modprobe.d/blacklist$ echo ?"blacklist b43"?>> /etc/modprobe.d/blacklist
(3)编译安装切换到下载（找到刚才下载的驱动文件）目录：cd 下载hybrid-portsrc_x86_64-v5_100_82_38.tar.gz?-C ../apps/wlan_drive/输入命令：$ cd ../apps/wlan_drive$ make$ uname -r终端将输出：2.6.35.6-45.fc14.x86_64$?sudo?cp?-rf wl.ko /lib/modules/2.6.35.6-45.fc14.x86_64/kernel/drivers/net/wireless$ sudo depmod$ sudo modprobe wl
现在检验以下驱动是否安装成功：输入：[zhoujh@alexzhou ~]$ lsmod | grep wlwl ? ? ? ? ? ? ? ? ? 2555141 ?0?lib80211 ? ? ? ? ? ? ? ?5095 ?2 lib80211_crypt_tkip,wl
此时输入：lspci -v终端将会输出：03:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)Subsystem: Foxconn International, Inc. Device e021Flags: bus master, fast devsel, latency 0, IRQ 17Memory at 9a400000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied>Kernel driver in use: wlKernel modules: wl
OK，现在你将看到你的本本无线信号的灯亮啦~~~

?

?

?

?

?