VB6.0与USB通讯时，如果获取USB的插入或者拔出消息呀？
VB6.0与USB通讯时，如果获取USB的插入或者拔出消息呀？ 知道的麻烦提示一下，谢谢啦。
[解决办法]

Private Type DEV_BROADCAST_HDR
    dbch_size           As Long
    dbch_devicetype     As Long
    dbch_reserved       As Long
End Type

Private Type DEV_BROADCAST_VOLUME
    DBCV_Size           As Long
    DBCV_DeviceType     As Long
    DBCV_Reserved       As Long
    DBCV_UnitMask       As Long
    DBCV_Flags          As Integer
End Type

Public Type AUTO_RUN
    Flags As String
End Type

Private Declare Function CallWindowProc Lib "user32" _
    Alias "CallWindowProcA" _
   (ByVal lpPrevWndFunc As Long, ByVal hWnd As Long, _
     ByVal Msg As Long, ByVal wParam As Long, _
     ByVal lParam As Long) As Long

Private Declare Function SetWindowLong Lib "user32" _
   Alias "SetWindowLongA" _
  (ByVal hWnd As Long, ByVal nIndex As Long, _
   ByVal wNewWord As Long) As Long

Private Const GWL_WNDPROC                As Long = (-4)
Private Const DBT_DEVICEARRIVAL          As Long = 32768
Private Const DBT_DEVICEREMOVECOMPLETE   As Long = 32772
Private Const DBT_DEVTYP_VOLUME          As Long = &H2
Public Const WM_CLOSE                   As Long = &H10
Private Const WM_DEVICECHANGE            As Long = &H219

Public DeviceCallBack  As Long

Public Sub StartUSBWatch(ByVal hWnd As Long)
    DeviceCallBack = SetWindowLong(hWnd, GWL_WNDPROC, AddressOf OnDeviceChange)
End Sub

Public Sub StopUSBWatch(ByVal hWnd As Long)
    DeviceCallBack = SetWindowLong(hWnd, GWL_WNDPROC, DeviceCallBack)
End Sub

Public Function OnDeviceChange(ByVal hWnd As Long, _
    ByVal Msg As Long, _
    ByVal wParam As Long, _
    ByVal lParam As Long) As Long
    
    If Msg = WM_DEVICECHANGE Then
        If wParam = DBT_DEVICEARRIVAL Or wParam = DBT_DEVICEREMOVECOMPLETE Then 
 
            '在这里写打开设备以及判断、处理代码        
        End If
    End If
    OnDeviceChange = CallWindowProc(DeviceCallBack, hWnd, Msg, wParam, lParam)
End Function

建一个标准模块

在 Form_Load 事件中调用
StartUSBWatch Me.hWnd

在 Form_Unload 事件中调用
StopUSBWatch Me.hWnd

注意：启动监视后，调试运行会无法访问源码窗口，例如断点，只能用热键。
[解决办法]
按说明拷贝下面代码到新的工程，拿个U盘插拔测试

一切正常!
'===========标准模块============
Option Explicit

Type GUID
Data1 As Long
Data2 As Integer
Data3 As Integer
Data4(7) As Byte
End Type '固定常数

Type DEV_BROADCAST_DEVICEINTERFACE
dbcc_size As Long
dbcc_devicetype As Long
dbcc_reserved As Long
dbcc_classguid As GUID
dbcc_name As Long
End Type '规定的常数

Type DEV_BROADCAST_VOLUME
dbcv_size As Long
dbcv_devicetype As Long
dbcv_reserved As Long
dbcv_unitmask As Long
dbcv_flags As Integer
End Type '规定的常数

Public Const GWL_WNDPROC = -4
Const DEVICE_NOTIFY_WINDOW_HANDLE = 0
Const WM_DEVICECHANGE = &H219&
Const DBT_DEVTYP_DEVICEINTERFACE = &H5&
Const DBT_DEVTYP_VOLUME = &H2&
Const DBT_DEVICEARRIVAL = &H8000&
Const DBT_DEVICEREMOVECOMPLETE = &H8004&
Const DRIVE_REMOVABLE = 2
Const DRIVE_NO_ROOT_DIR = 1

Public Declare Function SetWindowLongA Lib "User32.dll " (ByVal hwnd As Long, ByVal nIndex As Long, ByVal dwNewLong As Long) As Long
Declare Function CallWindowProcA Lib "User32.dll " (ByVal lpPrevWndFunc As Long, ByVal hwnd As Long, ByVal msg As Long, ByVal wParam As Long, ByVal lParam As Long) As Long
Declare Function RegisterDeviceNotificationA Lib "User32.dll " (ByVal hRecipient As Long, NotificationFilter As Any, ByVal Flags As Long) As Long
Declare Function UnregisterDeviceNotification Lib "User32.dll " (ByVal Handle As Long) As Long
Declare Sub RtlMoveMemory Lib "kernel32 " (Destination As Any, Source As Any, ByVal Length As Long)


Private m_hwnd As Long
Private m_lpPrevWndProc As Long
Private m_hDevNotify As Long

Public lpPrev As Long


'Public Sub RegDevNotify(ByVal hwnd As Long) '注册钩子
' Dim dbcc As DEV_BROADCAST_DEVICEINTERFACE
' If m_lpPrevWndProc = 0 Then
' m_hwnd = hwnd
' m_lpPrevWndProc = SetWindowLongA(m_hwnd, GWL_WNDPROC, AddressOf WndProc)
' dbcc.dbcc_size = Len(dbcc)
' dbcc.dbcc_devicetype = DBT_DEVTYP_DEVICEINTERFACE

' m_hDevNotify = RegisterDeviceNotificationA(hwnd, dbcc, DEVICE_NOTIFY_WINDOW_HANDLE)
' End If
'End Sub
'
'Public Sub UnregDevNotify() '解除钩子
' If m_lpPrevWndProc Then
' UnregisterDeviceNotification m_hDevNotify
' SetWindowLongA m_hwnd, GWL_WNDPROC, m_lpPrevWndProc
' m_lpPrevWndProc = 0
' End If
'End Sub


Public Function WndProc(ByVal hwnd As Long, ByVal msg As Long, ByVal wParam As Long, ByVal lParam As Long) As Long '消息拦截 当有消息时候会在这里出现
If msg = WM_DEVICECHANGE Then '当消息是 磁盘发生改变
Debug.Print msg '打印变量值[/color]
Debug.Print wParam '打印变量值[/color]
Debug.Print lParam '打印变量值[/color]
' If wParam = DBT_DEVICEARRIVAL Or wParam = DBT_DEVICEREMOVECOMPLETE Then '当标志是插入一个磁盘 或者 移动完成
' MsgBox ("USB Changed !!")
' End If
End If
WndProc = CallWindowProcA(lpPrev, hwnd, msg, wParam, lParam) '返回消息给系统 否则系统所有消息都被拦截 你的电脑几乎就是废了 关机都不行
End Function

''===============调用==============
'Sub Form_Load()
' RegDevNotify Me.hwnd '向系统注册一个拦截优盘状态的钩子
'End Sub
'
'Sub Form_Unload(Cancel As Integer)
' UnregDevNotify '解除钩子
'End Sub

'窗口代码
Option Explicit

Private Sub Form_Load()
lpPrev = SetWindowLongA(hwnd, GWL_WNDPROC, AddressOf WndProc)
End Sub

Private Sub Form_Unload(Cancel As Integer)
If lpPrev <> 0 Then
lpPrev = SetWindowLongA(hwnd, GWL_WNDPROC, lpPrev)
lpPrev = 0
End If
End Sub

[解决办法]

引用:

哦，忘了说一点了，我的设备是MimiUSB_B,是5pin的，不知道这是否有影响。。。。

你的usb怎么会有5根线？usb都是4跟线的
没有返回拔出消息，估计和你的驱动程序有关