s3c6410(arm11核)的nandflash移植

第一步，配置内核

<*>Memory Technology Device (MTD) support --->

[*] MTD partitioning support

<*> NAND Device Support --->

<*> NAND Flash support for Samsung S3C SoCs

<*> Support for generic platform NAND driver

第二步：配置资源，添加以下代码

（1）头文件#include <linux/mtd/nand.h>#include <linux/mtd/partitions.h>#include <linux/mtd/physmap.h>#include <linux/mtd/partitions.h>#include <plat/nand.h>（2）配置信息#define SZ_1K                           0x00000400#define SZ_1M                           0x00100000/* NAND flash controller */#define S3C64XX_PA_NAND          (0x70200000)#define S3C64XX_SZ_NAND           SZ_1M struct mtd_partition s3c_partition_info[] ={       {                .name             = "Bootloader",                .offset            = 0,                .size        = (4 * 128 *SZ_1K),                .mask_flags    = MTD_CAP_NANDFLASH,       },       {                .name             = "Kernel",                .offset            = (4 * 128 *SZ_1K),                .size        = (5*SZ_1M) ,                .mask_flags    = MTD_CAP_NANDFLASH,        },       {                .name             = "File System",                .offset            = MTDPART_OFS_APPEND,                .size        = MTDPART_SIZ_FULL,       } }; static struct s3c2410_nand_sets3c6410_nand_sets[] = {       [0]= {              .name             = "nand",              .nr_chips = 1,              .nr_partitions  = ARRAY_SIZE(s3c_partition_info),              .partitions       = s3c_partition_info,       },}; static struct s3c2410_platform_nands3c6410_nand_info = {       .tacls              = 25,       .twrph0          = 55,       .twrph1          = 40,       .nr_sets   = ARRAY_SIZE(s3c6410_nand_sets),       .sets        = s3c6410_nand_sets,};

（3）注册nandflah设备

1.在static void __init smdk6410_machine_init(void)函数中添加以下代码
s3c_nand_set_platdata(&s3c6410_nand_info);

2.添加平台设备

static struct platform_device*anw6410_devices[] __initdata = {

&s3c_device_fb,

&anw6410_lcd_powerdev,

&anw6410_device_eth,

//新添加

&s3c_device_nand,

};