ubuntu下minicom,fastboot安装

?一、minicom的安装

????? 1.用sudo apt-get install minicom安装

? ?? 2.设置

?????? 用sudo minicom -s进入设置界面，选择Serial port setup选项：

????? serial device :/dev/ttyUSB0?

?????? Bps/Par/Bits:115200 8N1

?????? Hardware Flow Control: NO

??????Software Flow Control: NO

????? 之后退出保存。

????? 使用时敲minicom命令

?

二、fastboot安装

??????? 先下载fastboot工具，一般编译工具里自带。下面就root用户下安装讨论。

??????? 建个51-android.rules文件，内容如下：

??????? # adb protocol on passion (Nexus One)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="0002", MODE="0600", OWNER="uarmchen"
# fastboot protocol on passion (Nexus One)
SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", ATTR{idProduct}=="0fff", MODE="0600", OWNER="uarmchen"
# adb protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e22", MODE="0600", OWNER="<uarmchen>"
# fastboot protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e20", MODE="0600", OWNER="<uarmchen>"
# adb protocol on stingray/wingray (Xoom)
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", ATTR{idProduct}=="70a9", MODE="0600", OWNER="<uarmchen>"
# fastboot protocol on stingray/wingray (Xoom)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="708c", MODE="0600", OWNER="<uarmchen>"
# adb protocol on maguro/toro (Galaxy Nexus)
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", ATTR{idProduct}=="6860", MODE="0600", OWNER="<uarmchen>"
# fastboot protocol on maguro/toro (Galaxy Nexus)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e30", MODE="0600", OWNER="<uarmchen>"
# adb protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d101", MODE="0600", OWNER="<uarmchen>"
# fastboot protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d022", MODE="0600", OWNER="<uarmchen>"
# usbboot protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d010", MODE="0600", OWNER="<uarmchen>"

????? 连设备时，用lsusb命令查看idVendor和idProduct，添加一组。

????? 之后将51-android.rules文件复制到/etc/udev/rules.d/ 目录下。

????? 在～/.bashrc文件里添加fastboot工具放的位置，如export PATH=$PATH:/home/uarmchen/tools

?????这样不用在fastboot命令前带sudo了。